723631L15PF

723631L15PF Overview

FIFO memory chip is contained in the TQFP package.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .FIFO consists of 120 terminations, which indicates that FIFO means is empty.These are the 120 pins for operation.There is a maximum current requirement of 400μA for its operation.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 120 pins on this board.With a frequency of 66.7MHz , it exhibits good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.Additionally, MAIL BOX; RETRANSMIT can be generated with this FIFO memory.

723631L15PF Features

FIFOs category
Frequency at most

723631L15PF Applications

There are a lot of Integrated Device Technology (IDT) 723631L15PF FIFOs Memory applications.

• Thermal Management for DDR3 Memory Modules
• Magnetic memories
• Computers
• SPI Bus Flash Memory Device
• Networking
• Data communications
• A/D output buffers
• One assembly
• Disk Controllers
• Emulators