72V221L15J8

72V221L15J8 Overview

FIFO memory chip is included in the PLCC package.The recommended mounting way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains a total of 32 terminations.There are 32 pins on the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 32 pins on this board.When the frequency is set to 66.7MHz it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.

72V221L15J8 Features

FIFOs category
Frequency at most

72V221L15J8 Applications

There are a lot of Integrated Device Technology (IDT) 72V221L15J8 FIFOs Memory applications.

• Thermal Management for DDR3 Memory Modules
• SPI Bus Flash Memory Devices
• Alarm System
• Test Equipment
• Controlled baseline
• SPI Bus Flash Memory Device
• Emulators
• Communications Systems
• Tape controllers
• Down-Hole Energy Drilling