74ABT16374CMTD

74ABT16374CMTD Overview

The package is in the form of 48-TFSOP (0.240, 6.10mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. In total, it contains 2 elements. As a result, it consumes 2mA quiescent current. There are 48 terminations,Power is supplied from a voltage of 5V volts. Its input capacitance is 5pF farads. In this case, the D flip flop belongs to the ABTfamily. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. The D flip flop has no ports embedded.

74ABT16374CMTD Features

Tube package
74ABT series

74ABT16374CMTD Applications

There are a lot of Rochester Electronics, LLC 74ABT16374CMTD Flip Flops applications.

• Control circuits
• Computing
• Safety Clamp
• ATE
• Shift registers
• Frequency Dividers
• Divide a clock signal by 2 or 4
• Individual Asynchronous Resets
• Balanced Propagation Delays
• Cold spare funcion