74ABT574CMSA

74ABT574CMSA Overview

20-SSOP (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Tubepackage. T flip flop is configured with an output of Tri-State, Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74ABT series. It should not exceed 200MHzin terms of its output frequency. A total of 1elements are present in it. Despite external influences, it consumes 50μAof quiescent current. The object belongs to the 74ABT574 family. Input capacitance of this device is 5pF farads. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. 8bits are used in its design. Using 8 circuits, it is highly flexible. For high efficiency, the supply voltage should be set to 5V. It has 3 output lines to operate. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. -32mA is set as the high level output current. It is set to 64mAfor the low level output current. Temperatures below 85°Care ideal for operating. A temperature above -40°Cshould be used for the operation. It is powered by 4.5V as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. This frequency can be achieved 200MHz.

74ABT574CMSA Features

Tube package
74ABT series
20 pins
8 Bits

74ABT574CMSA Applications

There are a lot of ON Semiconductor 74ABT574CMSA Flip Flops applications.

• Supports Live Insertion
• Buffer registers
• Bus hold
• Counters
• Frequency Divider circuits
• Control circuits
• Digital electronics systems
• Frequency division
• Safety Clamp
• Single Up Count-Control Line