74AC11074N

74AC11074N Overview

In the form of 14-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. Powered by a 3V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74AC series. It should not exceed 150MHzin its output frequency. The 74AC11074 family contains this object. JK flip flop input capacitance is 3.5pF farads. Electronic part Through Holeis mounted in the way. This board is designed with 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The superior flexibility of this product is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 1 output lines. Quiescent current is consumed by the D latch in the amount of 4μA.

74AC11074N Features

Tube package
74AC series
14 pins

74AC11074N Applications

There are a lot of Texas Instruments 74AC11074N Flip Flops applications.

• Counters
• EMI reduction circuitry
• Reduced system switching noise
• Supports Live Insertion
• Buffered Clock
• Patented noise
• Convert a momentary switch to a toggle switch
• Cold spare funcion
• Balanced Propagation Delays
• Common Clocks