74ACT11074D

74ACT11074D Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. It is contained within the Tubepackage. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74ACT series. It should not exceed 125MHzin terms of its output frequency. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74ACT11074family make up this object. It is powered by a voltage of 5V . Its input capacitance is 3.5pFfarads. Electronic devices of this type belong to the ACTfamily. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. To achieve this superior flexibility, 2 circuits are used. The D latch operates on 5V volts. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. In order for the chip to function, it has 1output lines. In terms of quiescent current, it consumes 4μA .

74ACT11074D Features

Tube package
74ACT series
14 pins
5V power supplies

74ACT11074D Applications

There are a lot of Texas Instruments 74ACT11074D Flip Flops applications.

• Single Up Count-Control Line
• Patented noise
• Instrumentation
• Frequency division
• Latch
• Convert a momentary switch to a toggle switch
• Storage Registers
• Data Synchronizers
• Communications
• Automotive