74FCT162374ETPAG

74FCT162374ETPAG Overview

The item is packaged in TSSOPcases. In total, there are 2 elements. There have been 48 terminations. A voltage of 5V provides power to the D latch. It is a member of the FCTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. This board is designed with 48pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. There are 16bits in its design. It runs on 5Vvolts of power. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. 500μAquiescent current consumed. A high level output current of -24mAis set. 24mAis set as the low level output current. Ideally, the operating temperature should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. In order for it to operate, a supply voltage of 4.5Vis required. 5.5Vis its maximum supply voltage. BUS DRIVERis the logic IC it uses. Currently, it is equipped with 2 functions . It is equipped with 48 pins.

74FCT162374ETPAG Features

48 pins
16 Bits
5V power supplies
2 Functions
48 pin count

74FCT162374ETPAG Applications

There are a lot of Integrated Device Technology (IDT) 74FCT162374ETPAG Flip Flops applications.

• Clock pulse
• Registers
• Asynchronous counter
• Storage registers
• 2 – Bit synchronous counter
• Event Detectors
• Cold spare funcion
• EMI reduction circuitry
• Digital electronics systems
• Safety Clamp