74LVC1G175DCKRG4

74LVC1G175DCKRG4 Overview

In the form of 6-TSSOP, SC-88, SOT-363, it has been packaged. There is an embedded version in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 1.65V~5.5Vvolts. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74LVC series. A frequency of 175MHzshould be the maximum output frequency. Currently, there are 6 terminations. JK flip flop belongs to 74LVC1G175 family. Power is supplied from a voltage of 1.8V volts. Its input capacitance is 3pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic component mounted in the way of Surface Mount. With its 6pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 1bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Using 1 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 3.3V power supplies. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA. It consumes 10μA of quiescent current without being affected by external factors.

74LVC1G175DCKRG4 Features

Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies

74LVC1G175DCKRG4 Applications

There are a lot of Texas Instruments 74LVC1G175DCKRG4 Flip Flops applications.

• CMOS Process
• Registers
• Frequency Dividers
• 2 – Bit synchronous counter
• Cold spare funcion
• Load Control
• Frequency Divider circuits
• Safety Clamp
• Supports Live Insertion
• Data Synchronizers