ADP1870ACPZ-0.3-R7

ADP1870ACPZ-0.3-R7 Overview

The switching controller fits in the 10-VFDFN Exposed Pad, CSP package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). A 2.95V~20V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 300kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Search for "ADP1870" to find other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 600mV. You should note that the dc dc regulator's usual output current is 25A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 84 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. For better satisfaction, the value of DC to DC voltage regulator is MINIMUM OUTPUT VOLTAGE: 0.6V. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In order to ensure the dc switcher's functionality, users must limit the voltage to 20V due to the dc switcher's maximum input voltage. Voltage 2.95V is needed for the supply. Datasheets indicate that the switching converter can output 18V volts at its maximum. It runs on a 140μA supply current. Its lowest voltage output is not less than 600mV. There is 1.1mA nominal current supply for this the controllers dc.

ADP1870ACPZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ACPZ-0.3-R7 Applications

There are a lot of Analog Devices Inc. ADP1870ACPZ-0.3-R7 DC to DC converter applications.

• Surface processing equipment
• Motor controller circuits
• Driver circuits
• Serial communication converter
• Precision electronic equipment
• SMT equipment
• Access control systems
• Electric water heaters
• Thermal power
• Industrial controllers