ADP1873ARMZ-0.6-R7

ADP1873ARMZ-0.6-R7 Overview

The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). dc controls with 2.75V~20V voltage are supplied and operated. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 600kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 10 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Searching "ADP1873" will return other relevant dc to dc converter ics. The switching converter has a total of 10 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 600mV voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 65 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC to DC voltage regulator has the value of MINIMUM OUTPUT VOLTAGE 0.6V to better satisfy the requirement. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5.5V. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. A voltage of 2.75V is required for the supply. Output current will not exceed 25A. A datasheet states that the switching converter can output 4.67V volts at its maximum. There is a 140μA volt supply current. Its lowest voltage output is not less than 600mV. For this the controllers dc, the nominal current supply is 70mA.

ADP1873ARMZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE 0.6V

ADP1873ARMZ-0.6-R7 Applications

There are a lot of Analog Devices Inc. ADP1873ARMZ-0.6-R7 DC to DC converter applications.

• Cutting machine tools
• Energy management systems
• Emergency lighting monitoring equipment
• Game consoles
• Industrial controllers
• CNC system
• Television equipment
• Direct power supply system
• Computed tomography (CT)
• Pipe bending machines