ADP1882ARMZ-0.3-R7

ADP1882ARMZ-0.3-R7 Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). Voltages 2.75V~20V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 300kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. A variety of 10 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "ADP1882". There are a total of 10 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 17V. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 84 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. In order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.8V. The dc switcher's maximum input voltage is 5.5V; users must limit it accordingly. 2.75V is the required supply voltage. DC switchers cannot produce output currents greater than 25A. Datasheets indicate that the switching converter can output 4.67V volts at its maximum. The supply current of the voltage controller is 140μA. 800mV voltage output is lower than 800mV. There is 70mA nominal current supply for this the controllers dc.

ADP1882ARMZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE 0.8V

ADP1882ARMZ-0.3-R7 Applications

There are a lot of Analog Devices Inc. ADP1882ARMZ-0.3-R7 DC to DC converter applications.

• Automatic testing equipment
• Textile machinery
• Remotely powered electric motors
• Smoke prevention equipment
• Emergency lighting monitoring equipment
• Injection molding machinery
• Imported equipment
• Electrical power transmission
• Domestic water pumps
• Packaging