CD40174BCN

CD40174BCN Overview

The package is in the form of 16-DIP (0.300, 7.62mm). It is contained within the Tubepackage. It is configured with Non-Invertedas an output. The trigger configured with it uses Positive Edge. Through Holeis occupied by this electronic component. The supply voltage is set to 3V~15V. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 4000Bseries of FPGAs. A frequency of 12MHzshould be the maximum output frequency. D latch consists of 1 elements. This process consumes 4μA quiescents. Members of the 40174family make up this object. A 10pFfarad input capacitance is provided by this T flip flop. There is an electronic part mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with 6bits. The superior flexibility of this product is achieved by using 1 circuits. In order to operate, the chip has 6 output lines. Currently, there are 6 input lines present. The high level output current is set to -4.2mA. The low level output current is set to 4.2mA. It is recommended that the operating temperature be lower than 125°C. Ideally, the operating temperature should be greater than -55°C. Initially, it requires a voltage of 3V as the minimum supply voltage. It supports a maximum supply voltage of 15V volts. It is possible to obtain a frequency of 12MHz.

CD40174BCN Features

Tube package
4000B series
16 pins
6 Bits

CD40174BCN Applications

There are a lot of ON Semiconductor CD40174BCN Flip Flops applications.

• Shift Registers
• Data storage
• Data transfer
• Computing
• Buffer registers
• Automotive
• Bus hold
• Computers
• Patented noise
• Bounce elimination switch