CD74AC74ME4

CD74AC74ME4 Overview

The flip flop is packaged in SOIC. In total, it contains 2 elements. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3.3V provides power to the D latch. In this case, the D flip flop belongs to the ACfamily. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. The design is based on 1bits. This D flip flop is well suited for TUBE based on its reliable performance. It runs on 3.3/5Vvolts of power. The number of input lines is 1. In terms of quiescent current, it consumes 4μA . The high level output current is set to -24mA. A 24mAvalue is set for low-level output current. It is recommended that the operating temperature be lower than 125°C. The operating temperature should be higher than -55°C. Despite its minimal supply voltage of 1.5V, it is capable of operating. In this case, it supports a maximum supply voltage of 5.5V. It is possible to achieve 110MHz frequencies. D FLIP-FLOPis used as the logic IC in this D flip flop. It has 2 functions. It is equipped with 14 pin count. With an output current of 24mA, this flip flop offers maximum design flexibility.

CD74AC74ME4 Features

14 pins
1 Bits
3.3/5V power supplies
2 Functions
14 pin count

CD74AC74ME4 Applications

There are a lot of Texas Instruments CD74AC74ME4 Flip Flops applications.

• Bus hold
• Control circuits
• Matched Rise and Fall
• Storage Registers
• Counters
• Pattern generators
• Asynchronous counter
• QML qualified product
• Dynamic threshold performance
• Safety Clamp