CD74HC175E

CD74HC175E Overview

The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. Through Holemounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. This D flip flop should not have a frequency greater than 35MHz. In total, it contains 1 elements. Terminations are 16. The 74HC175 family contains it. A voltage of 4.5V is used to power it. Its input capacitance is 10pFfarads. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Through Hole. It is designed with 16 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. An electronic part designed with 4bits is used in this application. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be above 2V. In order for the device to operate, it requires 2/6V power supplies. The output current of 5.2mA makes it feature maximum design flexibility. 8μAquiescent current consumed. A total of 4 channels are available.

CD74HC175E Features

Tube package
74HC series
16 pins
4 Bits
2/6V power supplies

CD74HC175E Applications

There are a lot of Texas Instruments CD74HC175E Flip Flops applications.

• Computers
• Patented noise
• Storage registers
• Shift Registers
• Single Up Count-Control Line
• Frequency division
• Buffer registers
• Asynchronous counter
• Balanced Propagation Delays
• Functionally equivalent to the MC10/100EL29