CD74HCT174MG4

CD74HCT174MG4 Overview

In the form of SOIC, it has been packaged. There are 1 elements in it. It has been determined that there have been 16 terminations. A voltage of 5V provides power to the D latch. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. It is designed with 16 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. This D flip flop is well suited for TUBE based on its reliable performance. An electrical current of 5V volts is applied to it. The supply voltage should be maintained at 5V for high efficiency. Quiescent current is consumed by the D latch in the amount of 8μA. There is also a characteristic of DUMMY VAL. In this case, the high level output current is set to -4mA. There is 4mA output current at the low level. The operating temperature should be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. This frequency can be achieved at 25MHz. It adopts a logic IC of type D FLIP-FLOP. It is equipped with 1 Functions . There are 16 pins on the D latch.

CD74HCT174MG4 Features

16 pins
5V power supplies
1 Functions
16 pin count

CD74HCT174MG4 Applications

There are a lot of Texas Instruments CD74HCT174MG4 Flip Flops applications.

• ESD protection
• Balanced 24 mA output drivers
• Latch-up performance
• Frequency Divider circuits
• Dynamic threshold performance
• Computing
• Matched Rise and Fall
• Automotive
• Data transfer
• QML qualified product