DM74ALS174SJX

DM74ALS174SJX Overview

16-SOIC (0.209, 5.30mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 50MHzshould not be exceeded by its output. The list contains 1 elements. As a result, it consumes 19mA quiescent current and is not affected by external forces. Members of the 74ALS174family make up this object. This electronic part is mounted in the way of Surface Mount. This board has 16 pins. In this device, the clock edge trigger type is Positive Edge. 6bits are used in its design. Due to its superior flexibility, it uses 7 circuits. High efficiency requires the supply voltage to be maintained at 5V. It is designed with 2 output lines. Currently, there are 3 input lines present. -400μAis the output current at high level. It is set to 8mAfor the low level output current. Ideally, the operating temperature should be lower than 70°C. Ideally, the operating temperature should be higher than 0°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. In this case, it supports a maximum supply voltage of 5.5V. We are able to achieve a frequency of 50MHz.

DM74ALS174SJX Features

Tape & Reel (TR) package
74ALS series
16 pins
6 Bits

DM74ALS174SJX Applications

There are a lot of ON Semiconductor DM74ALS174SJX Flip Flops applications.

• Computers
• Buffer registers
• Count Modes
• Circuit Design
• Test & Measurement
• Counters
• Data storage
• Patented noise
• Computing
• Asynchronous counter