EPM570F256C5

EPM570F256C5 Overview

440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with FBGA.As a result, it has 160 I/O ports programmed.The device is programmed with 256 terminations.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.It is powered by a voltage of 2.5V volts.This part is part of the family [0].Bulkshould be used to package the chip.In this chip, the 256pins are programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.The supply voltage should be maintained at 3.3V for high efficiency.It is recommended to store data in [0].In this case, it is mounted by Surface Mount.This board has 256 pins.There is a maximum supply voltage of 3.6V.With a minimal supply voltage of [0], it operates.There are 160 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 1.8797GHz frequency achieved.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 85°Cat the time of operation.The logic block consists of 57 l logic blocks (LABs).An elementary building block consists of 570logic elements/cells.It is recommended that the maximal frequency be lower than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.

EPM570F256C5 Features

FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)

EPM570F256C5 Applications

There are a lot of Altera EPM570F256C5 CPLDs applications.

• Digital designs
• Programmable power management
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• DMA control
• Page register
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• TIMERS/COUNTERS
• Voltage level translation
• Configurable Addressing of I/O Boards
• Interface bridging