EPM7096LI68-15

EPM7096LI68-15 Overview

The mobile phone network has 96 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a PLCC package.The device is programmed with 52 I/Os.There is a 68terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5V is used as the power supply for this device.This part is included in Programmable Logic Devices.In this chip, the 68pins are programmed.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.In digital circuits, there are 1800gates, which act as a basic building block.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.The 68pins are designed into the board.A voltage of 5.25V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 4.75V.There are 52 Programmable I/Os.The frequency that can be achieved is 100MHz.The operating temperature should be higher than -40°C.Ideally, the operating temperature should be below 85°C.The logic block consists of 6 l logic blocks (LABs).Maximum frequency should be less than 125MHz.A programmable logic type can be categorized as EE PLD.

EPM7096LI68-15 Features

PLCC package
52 I/Os
68 pin count
68 pins
6 logic blocks (LABs)

EPM7096LI68-15 Applications

There are a lot of Altera EPM7096LI68-15 CPLDs applications.

• D/T registers and latches
• Storage Cards and Storage Racks
• Software-driven hardware configuration
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Address decoders
• Cross-Matrix Switch
• Bootloaders for FPGAs
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Software-Driven Hardware Configuration
• I/O expansion