ICM7242IPAZ

ICM7242IPAZ Overview

The timer clock is enclosed in a packaging that is attached to the DIP. There is a programmable timer set at a frequency of 13MHz.It is used to pack in Bulk case. To mount this digital timer with Through Hole. The operating supply voltage is rated at 340μA voltage. The minimum operating temperature of the chip must not be lower than -25°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 125μA. The number of Timers/Counters on the device is 1.

ICM7242IPAZ Features

Operate frequency at 13MHz
Package / Case: Bulk
Max Operating temperature at -25°C
Quiescent Current at 125μA
1 Timers/Counters

ICM7242IPAZ Applications

There are a lot of Intersil (Renesas Electronics America) ICM7242IPAZ Programmable Timers & Oscillators applications.

• Motor control
• Smart Key
• Power-Gating Applications
• Thermostats
• White Goods
• Sensor Node
• Intruder Detection
• Tamper Detection
• Low-Power Wireless
• Precision timing