KA2903DTF

KA2903DTF Overview

To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .This chip is designed with the Tape & Reel (TR) package.There are 8 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical Differential comparator.The total number of elements is 2 .Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.This comparator has 8 pins.If you require more pin-to-pin solutions, search KA2903 for more options.A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 600μA supply current.A supply current exceeding 1mA may result in the comparator malfunctioning.5V power supplies are enough to run the device.You can input a maximum current of 250nA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .Normal operation requires 36V operating supply voltage.Often found in ADC circuits, this device is packed in TR .

KA2903DTF Features

Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

KA2903DTF Applications

There are a lot of ON Semiconductor KA2903DTF linear comparators applications.

• Point of load regulators
• Battery-Powered Electronics
• Metering Systems
• Wide Range VCO; MOS Clock Timers
• Security Detection Systems
• System control and monitoring
• Power Supervision
• Set Top Boxes
• Limit Comparators
• Ultra-Low Power Systems