LM3524DMX/NOPB

LM3524DMX/NOPB Overview

With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 8V~40V and has a 8V~40V supply voltage. Qualified to work in an dc switcher with 0°C~125°C TJ. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Search for "LM3524" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. This dc dc voltage regulator should be powered by a voltage of 8V. A 60V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept 40V input voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 350kHz for this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 8V to ensure safety and reliability. DC switching uses 5mA when it is dormant. A current of 1mA is supplied to it. This controller performs best at a frequency of 350kHz.

LM3524DMX/NOPB Features

Transistor Driver Outputs
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Switching Frequency: 350kHz

LM3524DMX/NOPB Applications

There are a lot of Texas Instruments LM3524DMX/NOPB DC to DC converter applications.

• Electric water heaters
• Computer application technology
• Scientific research
• Wide-range voltage regulation circuits
• Remotely powered electric motors
• Imported equipment
• Machining centers
• Servo drive system
• Emergency lighting monitoring equipment
• Shearing machines