All Products

LMP7701MF/NOPB

1 Channels 86mA per Channel 0.2pA 88 dB Instrumentational OP Amps 0.0004μA 9V 2.7V~12V ±1.35V~6V LMP7701 5 Pins SC-74A, SOT-753

Manufacturer: Texas Instruments
Origchip NO: 815-LMP7701MF/NOPB
Package: SC-74A, SOT-753
Datasheet: -
Stock: 348
Description: 1 Channels 86mA per Channel 0.2pA 88 dB Instrumentational OP Amps 0.0004μA 9V 2.7V~12V ±1.35V~6V LMP7701 5 Pins SC-74A, SOT-753(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	LMP®
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	LMP7701
Pin Count	5
Output Type	Rail-to-Rail
Operating Supply Voltage	9V
Number of Channels	1
Operating Supply Current	790μA
Nominal Supply Current	715μA
Output Current	42mA
Slew Rate	1.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	88 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±1.35V~6V
Output Current per Channel	86mA
Input Offset Voltage (Vos)	200μV
Bandwidth	2.5MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	2500 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.0004μA
Power Supply Rejection Ratio (PSRR)	86dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6.6V
Voltage - Input Offset	37μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMP7701MF/NOPB Overview

In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. In this case, there are 5 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 5 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 790μA , this buffer op amp will be able to operate. 130dB should be the voltage gain. There are 1 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 9V voltage. An buffer amplifier is packed in a TR-shape according to the design. As the name implies, LMP? refers to the series of the buffer op amp.

LMP7701MF/NOPB Features

5 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail

LMP7701MF/NOPB Applications

There are a lot of Texas Instruments LMP7701MF/NOPB Instrumentational OP Amps applications.

PDA
Switching amplifier
E-book readers
RF cable systems
Industrial applications including automation
Cinema or auditorium audio system
Active probe
Professional videography
Signal operation
High/low-pass filter circuit