M4A3-256/128-7YC

M4A3-256/128-7YC Overview

There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 208-BFQFP package.As a result, it has 128 I/O ports programmed.There is a 208terminations set on devices.This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 3.3V volts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.208pins are programmed on the chip.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 10000gates.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 97.There should be a lower maximum frequency than 125MHz.To detect the status of input signals, there are 14dedicated inputs.

M4A3-256/128-7YC Features

208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins

M4A3-256/128-7YC Applications

There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7YC CPLDs applications.

• Multiple Clock Source Selection
• I2C BUS INTERFACE
• TIMERS/COUNTERS
• Synchronous or asynchronous mode
• Power automation
• Field programmable gate
• State machine control
• Address decoding
• STANDARD SERIAL INTERFACE UART
• Multiple DIP Switch Replacement