M74HC175B1R

M74HC175B1R Overview

In the form of 16-DIP (0.300, 7.62mm), it has been packaged. As part of the package Tube, it is embedded. It is configured with Differentialas an output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. The operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. The 74HCseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 61MHz. In total, there are 1 elements. Despite external influences, it consumes 4μAof quiescent current. A total of 16 terminations have been made. This D latch belongs to the family of M74HC175. A voltage of 4.5V is used as the power supply for this D latch. JK flip flop input capacitance is 5pF farads. It is a member of the HC/UHfamily of D flip flop. Through Hole mounts this electronic component. As you can see from the design, it has pins with 16. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. Flip flops designed with 4bits are used in this part. 6Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. 4 circuits are used to achieve its superior flexibility. A total of 2/6V power supplies are needed to run it.

M74HC175B1R Features

Tube package
74HC series
16 pins
4 Bits
2/6V power supplies

M74HC175B1R Applications

There are a lot of STMicroelectronics M74HC175B1R Flip Flops applications.

• Differential Individual
• Computers
• Registers
• Cold spare funcion
• Count Modes
• Circuit Design
• Shift Registers
• Functionally equivalent to the MC10/100EL29
• Balanced Propagation Delays
• Digital electronics systems