NB4L52MNG

NB4L52MNG Overview

The flip flop is packaged in 16-VFQFN Exposed Pad. D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. This trigger is configured to use Negative Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2.375V~5.5Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. A total of 1 elements are present. 16terminations have occurred. You can search similar parts based on NB4L52. The power source is powered by 2.5V. An electronic device belonging to the family 4Lcan be found here. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 16 pins. This device has Negative Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. This flip flop is designed with 1 Bits. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 2.375Vin order to ensure normal operation. This D flip flop is well suited for RAIL based on its reliable performance. An electrical current of 2.5/5V volts is applied to it. If high efficiency is desired, the supply voltage should be kept at 3.3V. The 25mA output current allows it to be designed with the greatest amount of flexibility. Additionally, it is characterized by LVPECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V. A high level output current of -25mAis set. It is set to 25mAfor low level output current. This can be achieved at a frequency of 4GHz.

NB4L52MNG Features

Tube package
16 pins
1 Bits
2.5/5V power supplies

NB4L52MNG Applications

There are a lot of ON Semiconductor NB4L52MNG Flip Flops applications.

• Shift registers
• Data transfer
• Event Detectors
• Count Modes
• Balanced 24 mA output drivers
• Instrumentation
• Frequency Dividers
• Consumer
• Reduced system switching noise
• Pattern generators