SN74AC534DW

SN74AC534DW Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74AC series. A frequency of 150MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 4μA quiescent current. There are 20 terminations,The 74AC534 family contains this object. It is powered by a voltage of 3.3V . The input capacitance of this JK flip flopis 4.5pF farads. It is a member of the ACfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. There are 8bits in its design. It reaches 6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Due to its superior flexibility, it uses 8 circuits. The flip flop has 2embedded ports. Featuring the maximum design flexibility, it has an output current of 24mA . It has 3lines.

SN74AC534DW Features

Tube package
74AC series
20 pins
8 Bits

SN74AC534DW Applications

There are a lot of Texas Instruments SN74AC534DW Flip Flops applications.

• Consumer
• Pattern generators
• Frequency division
• Clock pulse
• Single Up Count-Control Line
• Synchronous counter
• Cold spare funcion
• Latch-up performance
• Memory
• EMI reduction circuitry