SN74AHC574DWRE4

SN74AHC574DWRE4 Overview

The item is packaged in SOICcases. There is an embedded version in the package Tape & Reel (TR). The number of terminations is 20. The power source is powered by 3.3V. The electronic device belongs to the AHC/VHC/H/U/Vfamily. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in this flip flop. Its superior flexibility is attributed to its use of 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 1 output lines. It is reported that there are 3 input lines. -8mAis the output current at high level. There is no low level output current set at 8mA. Operating temperatures should be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -40°C. A minimum supply voltage of 2V is required for these RS flip flops to operate. It supports the maximal supply voltage of 5.5V. We are able to achieve a frequency of 115MHz. This logic IC is BUS DRIVER. There are 1 functions available on the JK flip flop. This device is equipped with a pin count of 20. As a result of the output current of 8mA, the design flexibility is maximized.

SN74AHC574DWRE4 Features

Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count

SN74AHC574DWRE4 Applications

There are a lot of Texas Instruments SN74AHC574DWRE4 Flip Flops applications.

• Communications
• ESD performance
• Balanced Propagation Delays
• ESCC
• Clock pulse
• Buffer registers
• Divide a clock signal by 2 or 4
• Dynamic threshold performance
• ESD protection
• Safety Clamp