SN74AHC74MDREP

SN74AHC74MDREP Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 2V~5.5V is required for operation. In this case, the operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. There should be no greater frequency than 115MHzon its output. T flip flop consumes 2μA quiescent energy. There are 14 terminations,If you search by 74AHC74, you will find similar parts. It is powered from a supply voltage of 3.3V. Its input capacitance is 2pFfarads. Devices in the AHCfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. The 14pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TR based on its reliable performance. The 8mA output current allows it to be designed with the greatest amount of flexibility. There are no output lines on the JK flip flop.

SN74AHC74MDREP Features

Tape & Reel (TR) package
74AHC series
14 pins

SN74AHC74MDREP Applications

There are a lot of Texas Instruments SN74AHC74MDREP Flip Flops applications.

• Bounce elimination switch
• Single Down Count-Control Line
• Frequency Dividers
• Buffered Clock
• Latch-up performance
• ESCC
• QML qualified product
• Matched Rise and Fall
• CMOS Process
• Memory