SN74ALS667NT

SN74ALS667NT Overview

The package in which it is embedded is named 24-DIP (0.300, 7.62mm). The package is in the form of Tube. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. During operation, the temperature is set at 0°C~70°C. In the 74ALS series, this FPGA is located. 8 Bits are used in the design of this electronic part. In this device, there are 24 terminations that have been designed. 74ALS667 is its family. With the supply voltage set at 5V, it is able to operate. The device is equipped with 24 pins. It is part of the family of electronic devices called ALS. It is designed with 24 pins. It is mounted according to the Through Hole method. 2 ports are available on this device. This part is included in FF/Latches. A total of 5V power supplies are needed to run it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It features maximum flexibility in design due to 24mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 5V. In addition to that, it is also characterized by WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK.

SN74ALS667NT Features

24-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS667 family
24 pin count
24 pins
5V power supplies

SN74ALS667NT Applications

There are a lot of Texas Instruments SN74ALS667NT Latches applications.

• Counter control
• Audio and video switching
• Multistage ripple counting
• Shift Registers
• A/D converters
• Stacked or Push-Down Registers
• Pseudo-random code generators
• Accumulator Registers
• Relay replacement
• Parallel data synchronization