SN74AUP1G80DRYR

SN74AUP1G80DRYR Overview

It is embeded in 6-UFDFN case. A package named Tape & Reel (TR)includes it. T flip flop uses Invertedas the output. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 0.8V~3.6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74AUPseries FPGA. A frequency of 260MHzshould not be exceeded by its output. As a result, it consumes 0.9μA quiescent current. There have been 6 terminations. If you search by 74AUP1G80, you will find similar parts. Power is provided by a 1.2V supply. The input capacitance of this T flip flop is 1.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of AUP/ULP/V. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 6. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop is designed with 1bits. Normally, the supply voltage (Vsup) should be kept above 0.8V. As a result of its reliable performance, this T flip flop is suitable for TR.

SN74AUP1G80DRYR Features

Tape & Reel (TR) package
74AUP series
6 pins
1 Bits

SN74AUP1G80DRYR Applications

There are a lot of Texas Instruments SN74AUP1G80DRYR Flip Flops applications.

• Frequency Divider circuits
• Buffered Clock
• EMI reduction circuitry
• Divide a clock signal by 2 or 4
• Convert a momentary switch to a toggle switch
• Bounce elimination switch
• Parallel data storage
• Balanced 24 mA output drivers
• ESD performance
• Frequency division