SN74F109N

SN74F109N Overview

The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). A package named Tubeincludes it. This output is configured with Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. There is JK Type type of electronic flip flop associated with this device. The FPGA belongs to the 74F series. There should be no greater frequency than 150MHzon its output. T flip flop consumes 17mA quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74F109 family. It is powered by a voltage of 5V . This D flip flop belongs to the family of F/FAST. There is an electronic part that is mounted in the way of Through Hole. As you can see from the design, it has pins with 16. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The superior flexibility is achieved through the use of 2 circuits. The D latch runs on a voltage of 5V volts. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 20mA.

SN74F109N Features

Tube package
74F series
16 pins
5V power supplies

SN74F109N Applications

There are a lot of Texas Instruments SN74F109N Flip Flops applications.

• Latch
• Parallel data storage
• Balanced Propagation Delays
• Common Clocks
• Computing
• QML qualified product
• Synchronous counter
• Balanced 24 mA output drivers
• Reduced system switching noise
• Count Modes