SN74F175N

SN74F175N Overview

The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74F series. It should not exceed 140MHzin terms of its output frequency. A total of 1elements are contained within it. It consumes 34mA of quiescent current without being affected by external factors. There have been 16 terminations. You can search similar parts based on 74F175. The D flip flop is powered by a voltage of 5V . In terms of electronic devices, this device belongs to the F/FASTfamily of devices. This electronic part is mounted in the way of Through Hole. A total of 16pins are provided on this board. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in this flip flop. The superior flexibility is achieved through the use of 4 circuits. A total of 5V power supplies are needed to run it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 20mA makes it feature maximum design flexibility.

SN74F175N Features

Tube package
74F series
16 pins
1 Bits
5V power supplies

SN74F175N Applications

There are a lot of Texas Instruments SN74F175N Flip Flops applications.

• Set-reset capability
• Dynamic threshold performance
• Buffer registers
• Pattern generators
• Control circuits
• Parallel data storage
• Asynchronous counter
• Balanced Propagation Delays
• Data storage
• Convert a momentary switch to a toggle switch