SN74HCT377DWR

SN74HCT377DWR Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74HCT series. You should not exceed 37MHzin its output frequency. In total, it contains 1 elements. There is 8μA quiescent consumption. 20terminations have occurred. The 74HCT377family includes it. The D flip flop is powered by a voltage of 5V . A 3pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the HCTfamily. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 8 Bits. Its flexibility is enhanced by 8 circuits. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 5V power supplies. In order to ensure high efficiency, the supply voltage should remain at 5V. Currently, there are 3 input lines present. WITH HOLD MODEis also one of its characteristics.

SN74HCT377DWR Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT377DWR Applications

There are a lot of Texas Instruments SN74HCT377DWR Flip Flops applications.

• QML qualified product
• Clock pulse
• Data transfer
• Frequency Divider circuits
• Asynchronous counter
• ESCC
• Dynamic threshold performance
• Storage registers
• Communications
• Data storage