SN74LVC1G79DBVT

SN74LVC1G79DBVT Overview

SC-74A, SOT-753is the way it is packaged. The package Tape & Reel (TR)contains it. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. -40°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin its output frequency. As a result, it consumes 10μA quiescent current. There have been 5 terminations. The object belongs to the 74LVC1G79 family. A voltage of 1.8V provides power to the D latch. Its input capacitance is 4pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. With its 5pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 1bits in its design. To achieve this superior flexibility, 1 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The power supply is 3.3V. The output current of 32mA makes it feature maximum design flexibility.

SN74LVC1G79DBVT Features

Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G79DBVT Applications

There are a lot of Texas Instruments SN74LVC1G79DBVT Flip Flops applications.

• Divide a clock signal by 2 or 4
• Parallel data storage
• Cold spare funcion
• Guaranteed simultaneous switching noise level
• Pattern generators
• CMOS Process
• Storage registers
• Differential Individual
• Bounce elimination switch
• Safety Clamp