SN74LVC374APWR

SN74LVC374APWR Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). It is included in the package Cut Tape (CT). As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74LVCseries comprises this type of FPGA. Its output frequency should not exceed 100MHz. A total of 1elements are contained within it. There is 10μA quiescent consumption. Currently, there are 20 terminations. The object belongs to the 74LVC374 family. It is powered from a supply voltage of 1.8V. This T flip flop has a capacitance of 4pF farads at the input. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. The superior flexibility of this circuit is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A D flip flop with 2embedded ports is available. With an output current of 24mA, it is possible to design the device in any way you want. This input has 3lines.

SN74LVC374APWR Features

Cut Tape (CT) package
74LVC series
20 pins
8 Bits

SN74LVC374APWR Applications

There are a lot of Texas Instruments SN74LVC374APWR Flip Flops applications.

• High Performance Logic for test systems
• Storage Registers
• Data Synchronizers
• ESCC
• Functionally equivalent to the MC10/100EL29
• Modulo – n – counter
• Common Clocks
• ATE
• CMOS Process
• Latch-up performance