SN74LVTH374PWR

SN74LVTH374PWR Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVTH series. It should not exceed 150MHzin its output frequency. The list contains 1 elements. As a result, it consumes 190μA quiescent current. 20terminations have occurred. You can search similar parts based on 74LVTH374. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 3pF farads. It is a member of the LVTfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number Bus Driver/Transceiver. It is designed with 8bits. The supply voltage (Vsup) should be kept above 2.7V for normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 3.3V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are 3 output lines on it.

SN74LVTH374PWR Features

Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits

SN74LVTH374PWR Applications

There are a lot of Texas Instruments SN74LVTH374PWR Flip Flops applications.

• ESD performance
• Frequency Divider circuits
• Clock pulse
• Frequency Dividers
• Shift registers
• Convert a momentary switch to a toggle switch
• Common Clocks
• Balanced Propagation Delays
• Event Detectors
• Set-reset capability