TPS51217DSCT

TPS51217DSCT Overview

With a 10-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~6.5V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Power Good provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING REGULATOR output. Terminal (s) of the switching converters are designed at the DUAL position. Various 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 5V. Search for "TPS51217" to find other relevant dc to dc converter ics. There are only 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 2.6V. You should note down the dc dc regulator's usual output current of 20A when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. The switching controller works at a frequency of 340kHz. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 2.6V to better satisfy the requirement. To run the voltage regulator dc to dc safely and reliably, users should apply 6.5V to the voltage regulator dc to dc. There are several dc to dc voltage regulator in the D-CAP? series. During dormancy, the dc switching uses 320μA. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. There must be a voltage supply of 5V volts. A dc switcher can only produce an output current of 20A. The controller should not be supplied with more current than 0.5mA. At its maximum output, the switching converter can provide 2.6V volts. At its lowest voltage, the voltage controller does not produce less than 600mV.

TPS51217DSCT Features

Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 340kHz
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 2.6V

TPS51217DSCT Applications

There are a lot of Texas Instruments TPS51217DSCT DC to DC converter applications.

• Hydrogen power
• Fire elevators
• Packaging
• Various CNC machine tools
• Servo drive system
• Digital precision reference circuits
• Gear/thread machining machines
• Experimental setup
• Computer-related products
• Combined machine tools