TPS53015DGS

TPS53015DGS Overview

As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4.5V~28V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 500kHz with this switching controller. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable, Power Good is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 10. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Searching "TPS53015" will return other relevant dc to dc converter ics. Total pins of switching converter are 10. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4.5V. Based on the test statistics, DC regulator outputs voltage 7V. It's important to remember that the dc dc regulator's normaloutput current is 120mA, so you should note it down when starting a new project. The Surface Mount makes DC switcher suitable for most applications and prototypes. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V in order to better satisfy the requirement. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc to dc voltage regulator belongs to the D-CAP2?, Eco-Mode? series. DC switching uses 660μA when it is dormant. Voltage 12V is required for supply. With a current supply of 660μA, it runs.

TPS53015DGS Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Enable, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V

TPS53015DGS Applications

There are a lot of Texas Instruments TPS53015DGS DC to DC converter applications.

• Machining centers
• Smart grid
• Serial communication converter
• Smoke exhaust equipment
• PSRR circuits
• Low output voltage switching power supply circuits
• Post equipment
• Computed tomography (CT)
• Large fire protection systems
• Printing