TPS53219RGTT

TPS53219RGTT Overview

It comes in the 16-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 4.5V~25V volts and has 4.5V~25V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. A switching controller such as this can switch at a value of 500kHz . A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. QUAD are the position of the terminal of the switching converters. 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Searching "TPS53219" will return other relevant dc to dc converter ics. Total pins of switching converter are 16. In particular, switching converter belongs to the Switching Regulator or Controllers family. Test statistics indicate DC regulator outputs 5.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. There is a maximum frequency of 1.07MHz on this dc regulators. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V to better satisfy the requirement. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 25V. It belongs to the D-CAP?, Eco-Mode? series of dc to dc voltage regulator. In dormant mode, 400μA is used. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. The supply voltage should be 12V. A voltage of 4.5V must be present in the supply. Output current will not exceed 20A. It is important that the controller is supplied with 0.59mA more than 0.59mA volts of current. At its maximum, the switching converter can output 5.5V volts. There is 600mV voltage output lower than 600mV on the voltage controller.

TPS53219RGTT Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V

TPS53219RGTT Applications

There are a lot of Texas Instruments TPS53219RGTT DC to DC converter applications.

• seismic instrument power circuits
• Lathes
• Correction machines
• Printing equipment
• Driver circuits
• Surge protection circuits
• Imported equipment
• Access control systems
• Automatic plug-in machines
• Low output voltage switching power supply circuits