TPS61150DRCT

TPS61150DRCT Overview

Using its 10-VFDFN Exposed Pad package, it is possible to save board space. A LED driver using this design has 2 outputs.As a mounting method, Surface Mount is used.With high reliability and efficiency, this emerges as a DC DC Regulator.The led light driver is capable of working normally at -40°C~85°C TA.There are considerable benefits for Backlight.1.2MHz is the frequency in which it operates.In this case, it uses 10 terminations.The LED light driver has a base configuration of 10 pins.Based on our estimates, there are 14 segments.This LED driver can be found under the base part number TPS61150.It is acceptable to supply voltages of 6V.It consists of 10 pins.Additionally, it can be classified as Display Drivers based on its characteristics.The input voltage must be minimally 2.5V.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.In the case of supply current, there is a maximum value of 6V.This device is able to provide high efficiency when the maximal supply current should be less than 2mA.There is no current that can be supplied to the load.When operating with a maximum output current of 35mA, it can deliver all the benefits of a LED driver.In the absence of external factors, 2mA current is consumed.Voltages should not exceed 27V volts at the output.A minimum voltage of 2.5V is maintained by its output.

TPS61150DRCT Features

Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V

TPS61150DRCT Applications

There are a lot of Texas Instruments TPS61150DRCT LED Driver ICs applications.

• Medical surgery lighting
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Down lights
• Gallery lighting
• Dimmable LED for vehicle interiors
• Constant Voltage Power Source for portable equipment
• Street lighting
• Sports Facility Lighting
• LED headlights
• Architectural lighting