UC3527ANG4

UC3527ANG4 Overview

As a result of 16-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 2 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. A 8V~35V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~70°C TA dc switcher. It can switch at 100Hz~400kHz. dc dc regulator can be generalized using Through Hole. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 20V. UC3527 can be searched for other relevant dc to dc converter ics. 16 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 18V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 450kHz frequencies. For nominal working status, the input voltage can be set as 35V.

UC3527ANG4 Features

Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz

UC3527ANG4 Applications

There are a lot of Texas Instruments UC3527ANG4 DC to DC converter applications.

• Driver circuits
• Constant current circuits
• Printing equipment
• Alternators
• Mobile phones
• Bending machines
• Injection molding machinery
• Domestic water pumps
• Product testing
• Printing