UCC27322P

UCC27322P Overview

A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.There is a mounting bracket in the way of Through Hole.In the absence of a 4V~15V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~105°C TA.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.Under its base part number UCC27322, various related parts can be found.The device is mounted using Through Hole.At the time of design, it is configured with 8 pins.The device is specifically designed to operate at 14V volts.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 9A can be achieved at maximum power.Its subcategory of MOSFET Drivers contains various useful electronic components.A board with 8 component pins is available.Mosfet driver is based on a basis of 1 outputs that have been integrated.An output current of 9A is supported.Its maximum power dissipation of 350mW shows its power loss capacity without overheating.To increase stability, keep the supply current at 1mA.When this voltage is produced, it is marked as 150mV.

UCC27322P Features

Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 350mW

UCC27322P Applications

There are a lot of Texas Instruments UCC27322P gate drivers applications.

• Power factor correction (PFC) circuits
• High frequency line drivers
• 3-Phase Motor Inverter Driver
• Refrigerator
• High power buffers
• Smart Phones
• Isolated Supplies for controller area network (CAN),
• Multicolor LED/laser displays
• Solar inverters
• Motor controllers