UCC3813D-5

UCC3813D-5 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 3.6V~12V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. The switching controller is capable of switching at the 31kHz position. The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. Searching "UCC3813" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4V. Statistically, DC regulator outputs 4.06V volts. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 1MHz frequency setting on the switching controller. There must be a voltage supply of 10V volts. Current supplied to the controller should not exceed 30mA. The nominal supply current for this the controllers dc is 500μA.

UCC3813D-5 Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC3813D-5 Applications

There are a lot of Texas Instruments UCC3813D-5 DC to DC converter applications.

• Remotely powered electric motors
• Planers
• seismic instrument power circuits
• Thermal power
• Hydrogen power
• Smoke exhaust equipment
• Photovoltaic power
• Network technology
• Nuclear power plants
• Program control systems