All Products

54FCT374TLB

8 Bit Flip Flop QUAD 20 Pins LCC


  • Manufacturer: Integrated Device Technology (IDT)
  • Origchip NO: 378-54FCT374TLB
  • Package: LCC
  • Datasheet: PDF
  • Stock: 773
  • Description: 8 Bit Flip Flop QUAD 20 Pins LCC(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade MILITARY
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 14 ns
Quiescent Current 10μA
Turn On Delay Time 11 ns
Family FCT
Logic Function D-Type
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.032 A
High Level Output Current -12mA
Low Level Output Current 32mA
Independent Circuits 1
Clock Edge Trigger Type Positive Edge
Height 1.52mm
Length 8.9mm
Width 8.9mm
Thickness 1.52mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Factory Lead Time 10 Weeks
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case LCC
Number of Pins 20
Published 2009
JESD-609 Code e0
Pbfree Code no

54FCT374TLB Overview


The flip flop is packaged in a case of LCC. The number of terminations is 20. An input voltage of 5Vpowers the D latch. It is a member of the FCTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. There are 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 8bits are used in this part. This D flip flop is well suited for TUBE based on its reliable performance. A total of 5V power supplies are needed to run it. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be kept at 5V. As a result, it consumes 10μA of quiescent current without being affected by external factors. There is -12mA output current at the high level. There is 32mA output current at the low level. There should be a temperature below 125°Cduring operation. Ideally, the operating temperature should be greater than -55°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. There is a maximum voltage support of 5.5V. BUS DRIVERis used as the logic IC in this D flip flop. The T flip flop is equipped with 1functions . The D latch is equipped with 20 pins.

54FCT374TLB Features


20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

54FCT374TLB Applications


There are a lot of Integrated Device Technology (IDT) 54FCT374TLB Flip Flops applications.

  • Buffered Clock
  • Data Synchronizers
  • Latch-up performance
  • Memory
  • Individual Asynchronous Resets
  • Computers
  • Shift Registers
  • Storage registers
  • Load Control
  • Modulo – n – counter