7205L12J8

7205L12J8 Overview

FIFO memory chip is included in the PLCC package.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .The number of terminations in FIFO means is 32 .In the case of the operation pins, they are 32 pins.FIFO requires a minimum of 120mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Approximately 32 pins are attached to it.Components normally possess 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.In this FIFO memory IC, the clock runs at frequency 50MHz .

7205L12J8 Features

FIFOs category
Clock frequency of 50MHz

7205L12J8 Applications

There are a lot of Integrated Device Technology (IDT) 7205L12J8 FIFOs Memory applications.

• Consumer
• Thermal Management for DDR3 Memory Modules
• Test Equipment
• Cameras
• Switches
• Communications
• High-speed graphics pixel buffer
• IP Camera Buffer
• Data-acquisition systems
• Video time base correction