72221L10PF

72221L10PF Overview

You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 32 terminations.These are the 32 pins for operation.In order to operate FIFO design, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.The FIFO memory IC has a total of 32 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.

72221L10PF Features

FIFOs category
Frequency at most

72221L10PF Applications

There are a lot of Integrated Device Technology (IDT) 72221L10PF FIFOs Memory applications.

• Analog-to-digital converters
• Routers
• Disk Controllers
• Emulators
• HDD
• Programmable Logic Controller
• Measurement Equipment
• Consumer Systems
• IP Radio
• Firmware loaders