72825LB10PFG

72825LB10PFG Overview

TQFP is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Bulk .Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 128 terminations.128 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 100mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 128 pins on this board.It is capable of maintaining good accuracy with a frequency of 100MHz .During normal operation, the FIFO memory's maximum value is 100MHz .Normally, 5V power supplies are owned by the component.

72825LB10PFG Features

FIFOs category
Frequency at most

72825LB10PFG Applications

There are a lot of Integrated Device Technology (IDT) 72825LB10PFG FIFOs Memory applications.

• Test site
• Controlled baseline
• Test Equipment
• Battery Charger
• Portable Information Devices
• Switches
• SPI Bus Flash Memory Devices
• SPD for DDR3 Memory Modules
• Consumer
• Data