72841L25TF8

72841L25TF8 Overview

You can find FIFO memory chip in package LQFP .Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.These are the 64 pins for operation.FIFO design requires a maximum current of 60mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.With a frequency of 40MHz , it maintains good accuracy.For regular operation, the memory logic's maximum value is 40MHz .Normally, the component owns 5V power supplies.

72841L25TF8 Features

FIFOs category
Frequency at most

72841L25TF8 Applications

There are a lot of Integrated Device Technology (IDT) 72841L25TF8 FIFOs Memory applications.

• Measurement Equipment
• Cardiac Monitoring Device
• SPI Bus Flash Memory Device
• SPD for DDR3 Memory Modules
• Emulators
• Medical Monitoring Device
• Industrial Systems
• Notebook
• Analog-to-digital converters
• Communications Systems