72851L25TF8

72851L25TF8 Overview

The LQFP package contains FIFO memory chip.Tape & Reel case is used for packaging.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.For its operation, 80mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.In the presence of a 40MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 40MHz .Normally, the component owns 5V power supplies.

72851L25TF8 Features

FIFOs category
Frequency at most

72851L25TF8 Applications

There are a lot of Integrated Device Technology (IDT) 72851L25TF8 FIFOs Memory applications.

• Test site
• Network bridges
• Tape controllers
• Game Controller
• Computer Systems
• Consumer
• Laser Receiver System
• Programmable Logic Controller
• Routers
• Firmware loaders