72V2105L10PF8

72V2105L10PF8 Overview

TQFP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.An input voltage of 3.3V results in high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.These are the 64 pins for operation.There is a maximum current requirement of 60mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 64 pins are attached to it.In the presence of a 100MHz frequency, it can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.

72V2105L10PF8 Features

FIFOs category
Frequency at most

72V2105L10PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72V2105L10PF8 FIFOs Memory applications.

• Look-up Tables
• Tape controllers
• Battery Charger
• Consumer
• Multi-stage synchronizer
• Firmware loaders
• Video
• Cameras
• Data-acquisition systems
• MP3 Interface for Automobile